Thor VM1 with Microsoft Windows Embedded Standard 2009 User Guide 7
Dock
The Thor VM1 assembly consists of two parts, the Thor VM1 computer and the dock.
The Thor VM1 contains an internal UPS battery that, once fully charged, powers the
Thor VM1 for a minimum of 30 minutes when the unit is not mounted in the dock.
There are three available vehicle-mount docks for the Thor VM1:
• VM1D Standard Dock
• VM3D Enhanced Dock
• VMXD Enhanced Dock
Additionally an off-vehicle dock is available for the Thor VM1 for use in environment
such as an office where AC power is available:
• VMXD Enhanced Dock for Off-Vehicle Use
All docks provide:
• A mount for the Thor VM1 computer. The dock attaches to a vehicle via a RAM or U-
bracket mount or to a RAM table stand for use in an office environment.
• Conditioned power for the Thor VM1. The vehicle-mount docks accept 10-60VDC
power input directly or 50-150VDC power input with a DC/DC converter. The off-
vehicle dock requires an AC/DC power supply.
• Mobility of the Thor VM1, since the dock remains attached to the vehicle the Thor
VM1 computer can easily be moved from one vehicle equipped with a dock to
another.
• I/O ports as described in the below.
• Strain relief provisions for cables.
• Headset connection via an adapter cable. When a headset is not attached, the
microphone and speakers on the Thor VM1 are active.
Features of the docks are described in the following sections.
To Next Page
Loading...
Need help?
General
