46 Thor VM1 with Microsoft Windows Embedded Standard 2009 User Guide
Never put the Thor VM1 into the vehicle mounted assembly until the assembly is
securely fastened to the vehicle.
Prepare for Vehicle Mounting
The Thor VM1 should be secured to an area in the vehicle where it:
• Does not obstruct the driver's vision or safe vehicle operation.
• Will be protected from rain or inclement weather.
• Will be protected from extremely high concentrations of dust or wind-blown debris.
• Can be easily accessed by a user seated in the driver's seat while the vehicle is not in
operation.
Quick Start
The following list outlines, in a general way, the process to follow when mounting the
Thor VM1 in a vehicle. Refer to the following sections in this document for more details.
1. Install RAM Mount or Install U Bracket Mount to the vehicle.
2. Place Thor VM1 in the Dock.
3. Secure accessories such as a scanner holder to either an integrated or remote
mounting bracket.
4. Adjust the Thor VM1 to the best viewing angle.
5. Install Remote Antenna if necessary.
6. Connect Cables for any peripherals.
7. Connect vehicle power:
• 12-48 VDC Vehicles (10-60 VDC Direct Connection)
• 60-144 VDC Vehicles (50-150 VDC Power Supply, Screws on Top of Lid)
• 60-144 VDC Vehicles (50-150 VDC Power Supply, Screws on Side of Lid).
• Thor VX8 / Thor VX9 Adapter Cable
• VX6 / VX7 Adapter Cable
8. Secure all cables in Strain Relief Cable Clamps.
The Thor VM1 is ready for use.
To Next Page
Loading...
Need help?
General
