Thor VM1 with Microsoft Windows Embedded Standard 2009 User Guide 21
Cleaning
Cleaning the Thor VM1 and the Dock
Dampen a cloth with the cleaner and then wipe the surface. Do not spray the cleaner
directly onto the Thor VM1 or the dock. Avoid harsh chemicals. The following cleaners
are recommended:
• Windex® Glass Cleaner
• Formula 409® All-Purpose Cleaner or Glass and Surface Cleaner
• Fantastik® All Purpose Cleaner
• Liquid hand soap
Cleaning the Touch Screen
Note: These instructions are for components made of glass. If there is a removable protective
film sheet on the display, remove the film sheet before cleaning the screen.
Keep rough or sharp objects away from the Thor VM1 touch screen and, if installed, the
bar code reader scanning aperture.
If the glass becomes soiled or smudged, clean only with a standard household cleaner
such as Windex®
without vinegar or use isopropyl alcohol. Dampen the cloth with the
cleaner and then wipe the surface.
Do not use paper towels or harsh-chemical-based cleaning fluids since they may result
in damage to the glass surface. Use a clean, damp, lint-free cloth.
Do not scrub optical surfaces. If possible, clean only those areas which are soiled. Lint
and particulates can be removed with clean, filtered canned air.
Startup Help
Contact Technical Assistance if you need more help.
Touch screen is not accepting
stylus taps or needs
recalibration.
Press Ctrl+Esc to force the Start Menu to appear. Use the tab, backtab
and arrow keys to move the cursor from element to element.
See Touch Screen Calibration.
Thor VM1 seems to lockup as
soon as it is rebooted.
There may be slight delays while the wireless client connects to the
network, authorization for voice-enabled applications complete, and
Bluetooth relationships establish or re-establish.
When an application begins, the Thor VM1 is ready for use.
To Next Page
Loading...
Need help?
General
