196 Thor VM1 with Microsoft Windows Embedded Standard 2009 User Guide
Install a Root CA Certificate
Note: This section is only if the Windows certificate store is used. If the certificate store is not
used, copy the certificate to the C:\Program Files\Summit\certs folder or other path
specified in the Summit Certs global parameter.
Copy the certificate file to the Thor VM1. The certificate file has a .CER extension. Locate
the file and double-tap on it. If presented with a security warning, confirm that you want
to open the file.
If the Certificate Wizard does not start automatically when you double-tap the certifi-
cate .CER file:
1. Select Start > Run and type certmgr.msc in the text box and tap OK (Windows
Embedded Standard 2009 only).
2. Select Start and type certmgr.msc in the search box and press Enter (Windows
Professional 7 and Windows Embedded Standard 7 only).
3. In the left pane, right-click Trusted Root Certificate Authorities and select All
Tasks > Import.
4. The Certificate Import Wizard starts.
5. Tap Next and use the Browse.. button to locate the Root certificate copied to the
Thor VM1 then tap Open.
6. The certificate filename and path are displayed. Tap Next.
7. Tap the Install Certificate button.
8. The certificate import wizard starts. Tap Next.
a. Allow Windows to automatically select the certificate store.
b. Tap Next and Finish.
To Next Page
Loading...
Need help?
General
