128 Thor VM1 with Microsoft Windows Embedded Standard 2009 User Guide
Bluetooth
(Start) > Control Panel > Bluetooth
Discover and manage pairing with nearby Bluetooth devices.
• The EZPair software must be version 2ab or greater. See the Bluetooth About control
panel for the version installed. Contact Technical Assistance for software upgrade
information.
• The EZPair bar code on the Thor VM1 cannot be used to connect the SR61 scanner.
Follow this procedure:
1. Make sure the scanner is on and within range of the Thor VM1.
2. Tap the Discover button on the Bluetooth Devices tab.
3. From the list of discovered devices, tap the SR61 scanner and select Pair as a
Scanner
Factory Default Settings
To use the Honeywell/Intermec SR61 Bluetooth scanner with the Thor VM1:
Discovered Devices None
Settings
Turn off Bluetooth Disabled
Computer is connectable Enabled
Computer is
discoverable
Disabled
Prompt if devices
request to pair
Enabled
Continuous search Disabled
Filtered Mode Enabled
Printed Port - COM7: Disabled (unchecked) by default in both Filtered and Non Filtered Modes. The
option is dimmed in Non Filtered Mode.
Logging Disabled
Computer friendly name System Computer Description
Reconnect
Report when connection
lost
Enabled
Report when
reconnected
Disabled
Report failure to connect Enabled
Clear Pairing Table on
Boot
Disabled
Auto Reconnect on Boot Enabled
Auto Reconnect Enabled
To Next Page
Loading...
Need help?
General
