Thor VM1 with Microsoft Windows Embedded Standard 2009 User Guide 193
Certificates
Note: Please refer to the Security Primer to prepare the Authentication Server and Access Point
for communication.
Note: It is important that all dates are correct on the Thor VM1 and host computers when using
any type of certificate. Certificates are date sensitive and if the date is not correct
authentication will fail.
Quick Start
Root Certificates are necessary for EAP-TLS, PEAP/GTC and PEAP/MSCHAP.
1. Generate a Root CA Certificate either from the Thor VM1 or using a PC.
2. If a PC was used to request the certificate, copy the certificate to the Thor VM1.
3. Install a Root CA Certificate.
User Certificates are necessary for EAP-TLS.
1. Generate a User Certificate either from the Thor VM1 or using a PC.
2. If a PC was used to request the certificate, copy the certificate to the Thor VM1.
3. Install a User Certificate.
If using the Windows Certificate Store, the Windows Account must have a
password. The password cannot be left blank. The Summit Client Utility
uses the Windows user account credentials to access the Certificate Store.
The Windows user account credentials need not be the same as those
entered in the Summit Client Utility.
To Next Page
Loading...
Need help?
General
