24 Thor VM1 with Microsoft Windows Embedded Standard 2009 User Guide
Video Subsystem
The Thor VM1 video subsystem consists of a color TFT display. The video subsystem
complies with the VESA VL bus standard. The resolution of this display is 800 x 480 pix-
els. This resolution complies with the WVGA graphics industry standard.
The display supports screen blanking to eliminate driver distraction when the vehicle is
in motion.
Audio Interface
Speakers are located on the bottom front of the Thor VM1. A headset adapter cable pro-
vides a connection for headset operation. When a headset is plugged into the adapter
cable, the main speakers are disabled.
A microphone is located at the upper right of the Thor VM1 display, near the Thor VM1
emblem. When a headset is plugged into the adapter cable, the internal microphone is
disabled.
Card Slots
CompactFlash (CF) Slot
The CF ATA slot is not hot swappable. The Thor VM1 must be powered down to insert or
remove an ATA card. Since the operating system is stored on the CF ATA card, the Thor
VM1 cannot operate without the ATA card.
Secure Digital (SD) Slot
The SD slot accepts an SD memory card. The SD card is hot swappable.
Bluetooth EZPair
The Thor VM1 contains Bluetooth version 2.0 with Enhanced Data Rate (EDR) up to 3.0
Mbit/s over the air. Bluetooth device connection (or pairing) can occur at distances up
to 32.8 ft (10 meters) Line of Sight. The wireless client retains wireless connectivity
while Bluetooth is active.
The user cannot select PIN authentication or encryption on connections from the Thor
VM1. However, the Thor VM1 supports authentication requests from pairing devices. If
a pairing device requests authentication or encryption, the Thor VM1 displays a prompt
for the PIN or passcode. Maximum encryption is 128 bit. Encryption is based on the
length of the user’s passcode.
Bluetooth simultaneously supports one printer as a slave Bluetooth device and one
scanner, either as a slave or as a master Bluetooth device.
• The LED on the Bluetooth scanner illuminates during a scanning operation.
• Bar code data captured by the Bluetooth scanner can be manipulated by the settings
in the optional Freefloat Link*One application.
To Next Page
Loading...
Need help?
General
