Thor VM1 with Microsoft Windows Embedded Standard 2009 User Guide 161
Admin Login
To login to Administrator mode, tap the Admin Login button.
Once logged in, the button label changes to Admin Logout. The admin is automatically
logged out when the SCU is exited. The Admin can either tap the Admin Logout button,
or the OK button to logout.
Enter the Admin password (the default password is SUMMIT and is case sensitive) and
tap OK. If the password is incorrect, an error message is displayed.
The Administrator default password can be changed on the Global tab.
The end-user can:
• Turn the radio on or off on the Main tab.
• Select an active Profile on the Main tab.
• View the current parameter settings for the profiles on the Profile tab.
•View the global parameter settings on the Global tab.
• View the current connection details on the Status tab.
• View radio status, software versions and regulatory domain on the Main tab.
• Access additional troubleshooting features on the Diags tab.
After Admin Login, the end-user can also:
• Create, edit, rename and delete profiles on the Profile tab.
• Edit global parameters on the Global tab.
• Enable/disable the Summit tray icon in the taskbar.
Profile
Start > All Programs > Summit > Summit Client Utility > Profile tab
Note: Tap the Commit button to save changes before leaving this panel or the SCU. If the panel
is exited before tapping the Commit button, changes are not saved!
Factory Default Settings
Profile Default
SSID Blank
Client Name Blank
Power Save CAM
To Next Page
Loading...
Need help?
General
