152 Thor VM1 with Microsoft Windows Embedded Standard 2009 User Guide
User Accounts
Note: The following applies to a Thor VM1 that is not part of a domain. When the Thor VM1 is part
of a domain, the user is prompted for credentials at Windows startup or log on.
The Thor VM1 is preconfigured with an administrator account named Administrator. By
default, the Thor VM1 automatically logs onto the Administrator account at Windows
startup.
If the user assigns a password to the Administrator account:
• The password is stored and used when the Thor VM1 logs onto the Administrator
account at Windows startup. The user is not prompted to enter a password.
• If the user logs off, the password must be manually entered to log back onto the Thor
VM1.
• At the logon prompt, the user could specify a different user account (and password,
if necessary) to log on, assuming the account has been added to the Thor VM1.
• When the Thor VM1 is restarted, the Administrator account automatically becomes
the active user account, regardless of the active account before the restart.
If using certificates for authentication, the user must assign a password to the active
(Administrator) account.
Wi-Fi
(Start) > Control Panel > Wi-Fi (Classic view)
Provides a shortcut to access the 802.11a/b/g/n radio configuration utility.
Tap the Wi-Fi icon to access the Summit Client Utility.
If creating additional user accounts do not use # character (known as the
number sign, pound sign, hash symbol, etc.) in the user account name.
To Next Page
Loading...
Need help?
General
