44 Thor VM1 with Microsoft Windows Embedded Standard 2009 User Guide
Display Backlight Control
The display brightness on a Thor VM1 equipped with an outdoor display can be config-
ured to automatically adjust depending on the ambient light level via Screen Control.
Note: When automatic brightness control is enabled, the manual display brightness controls
described below have no effect.
Note: When automatic brightness control is enabled, the user can still manually adjust
brightness. However, automatic brightness control continues to adjust display brightness
if the ambient lighting level changes.
The display brightness can be adjusted manually, via the keypad:
•Use the 2nd + F7 keypress to increase backlight brightness and the 2nd + F8 keypress
to decrease backlight brightness.
To Next Page
Loading...
Need help?
General
