Honeywell Thor VM1 User Manual

102 Thor VM1 with Microsoft Windows Embedded Standard 2009 User Guide
• Certain USB scanners can be attached directly to the USB or USB-1 connector using
cable CBL-500-300-S00, as shown below.
To use the CBL-500-300-S00 cable:
1. Seat the D9 connector of the cable over the USB or USB11 connector on the Thor
VM1 dock.
2. Tighten the thumbscrews in a clockwise direction. Do not over tighten.
3. Follow the instructions provided with the scanner to attach the RJ50 end of the
cable to the scanner.
See USB Host to Scanner Cable for pinout details.
D9 Connector
RJ50 (10-pin) Connector

Honeywell Thor VM1 Specifications

General

Touchscreen	Yes
Power Supply	12V DC
IP Rating	IP65
Memory	2 GB
Connectivity	Bluetooth
Ports	USB
Operating Temperature	-20°C to 50°C
Wireless Connectivity	802.11 a/b/g
Battery	Optional