Thor VM1 with Microsoft Windows Embedded Standard 2009 User Guide 191
Some versions of the SCU require a User Cert password. If this entry field is present,
enter the password for the user certificate in the User Cert pwd box.
If there are no user certificates in the Windows certificate store, follow these instruc-
tions for Generate a User Certificate and Install a User Certificate.
See Windows Certificate Store vs. Certs Path for more information on CA certificate stor-
age.
Check the Validate server checkbox.
If using the Windows certificate store:
1. Check the Use MS store checkbox. The default is to use the Full Trusted Store.
2. To select an individual certificate, click on the Browse button.
3. Uncheck the Use full trusted store checkbox.
4. Select the desired certificate and click Select. You are returned to the Credentials
screen.
5. Click OK then click Commit.
If using the Certs Path option:
1. Leave the Use MS store box unchecked.
2. Enter the certificate filename in the CA Cert text box.
3. Click OK then click Commit.
The Thor VM1 should be authenticating the server certificate and using EAP-TLS for
the user authentication.
Ensure the correct Active Profile is selected on the Main tab and restart. The SCU Main
tab shows the device is associated after the radio connects to the network.
See Certificates for information on generating a Root CA certificate or a User certificate.
Note: The date must be properly set on the device to authenticate a certificate.
To Next Page
Loading...
Need help?
General
