3. Select Server > Add/Connect Server or right click Other Network Computers in Network
Neighborhood panel to add a server connection.
4. Enter the network computer name or IP of the Vertex OPC Server in the Host field. Enter
FactoryTalk Gateway in the Server field, then press OK to start the connection.
5. If the connection is successful, the OPC DA server and available OPC DA services will be
present in the server list panel. Select the FactoryTalk Gateway service on the connected
server and select Add Tags button from the OPC Server Connection Options panel to add
tags to monitor.
Vertex M 249 User Manual
To Next Page
Loading...
