7. Now add the tags to remotely monitor. From OPC Test menu bar, select Item > Add item…
8. Add desired tags.
9. After installing FactoryTalk Linx Gateway Remote Gateway on the client computer and
verifying OPC DA connectivity and operability, other OPC DA client application may be
used.
Demonstration with Matrikon OPC Explorer
1. Install the Matrikon OPC Explorer on remote client, Matrikon OPC Explorer 5.2 was used for
this documentation.
2. Start the Matrikon OPC Explorer application.
Vertex M 248 User Manual
To Next Page
Loading...
