3.7.1 Printer 42
3.7.2 External Network Connection 43
3.7.3 Network Computer Security 44
3.8 Wiring Alarm Relays 45
3.8.1 Relay Contacts 45
3.8.2 Wiring Guidelines 45
Chapter 4 - Startup 47
4.1 Initial Startup 47
4.1.1 Factory Configuration 47
4.2 Getting Started 47
4.3 Verify Installation 48
4.4 Power Up 48
4.5 Start Program 50
4.6 Configuration Utility 51
4.6.1 Database Management-Retention Periods 56
4.6.2 Define Gas Location 57
4.6.3 Configure Analyzers and Points 59
4.6.4 Set Analyzer Window 59
4.6.5 Configure Point 60
4.6.6 Define and Assign Relays 67
4.6.7 Configure PLC 68
4.6.8 Set Alarm Relays 70
4.6.9 Set Fault Relays 71
4.6.10 Profile Management-File Menu 72
4.6.11 Other Menu 72
4.7 Load Tape 73
4.8 Verify Flow Rates and Supply Vacuum 73
4.8.1 Verify Flow Rates 73
4.9 Leak Checking Sample Lines 75
4.10 Reconfigure 76
4.11 Moving to a New Site 76
4.12 System Shutdown 77
Vertex M 4 User Manual
To Next Page
Loading...
