Honeywell Vuquest 3320g - Data Format Non-Match Error Tone

84 Vuquest 3320g User Guide
found for a particular symbol, those prefixes and suffixes are not transmitted.
Any data that does not match your data format requirements generates an error
tone. If you wish to process this type of barcode without generating an error
tone, see Data Format Non-Match Error Tone on page 84.
Choose one of the following options. Default = Data Formatter On, Not Required,
Keep Prefix/Suffix
Data Format Non-Match Error Tone
When a barcode is encountered that doesn’t match your required data format, the
scanner normally generates an error tone. However, you may want to continue
scanning barcodes without hearing the error tone. If you scan the Data Format
Non-Match Error Tone Off barcode, data that doesn’t conform to your data format
is not transmitted, and no error tone will sound. If you wish to hear the error tone
when a non-matching barcode is found, scan the Data Format Non-Match Error
Tone On barcode. Default = Data Format Non-Match Error Tone On.
* Data Formatter On,
Not Required,
Keep Prefix/Suffix
Data Formatter On,
Not Required,
Drop Prefix/Suffix
Data Format Required,
Keep Prefix/Suffix
Data Format Required,
Drop Prefix/Suffix
* Data Format Non-Match Error
Tone On
Data Format Non-Match
Error Tone Off