Honeywell Vuquest 3320g - Interfunction Delay; Intermessage Delay

66 Vuquest 3320g User Guide
Interfunction Delay
An interfunction delay of up to 5000 milliseconds (in 5ms increments) may be
placed between the transmission of each control character in the message string.
Scan the Interfunction Delay barcode below, then scan the number of 5ms delays,
and the Save barcode from the Programming Chart, beginning on page 222.
To remove this delay, scan the Interfunction Delay barcode, then set the number of
delays to 0. Scan the Save barcode using the Programming Chart, beginning on
page 222.
Intermessage Delay
An intermessage delay of up to 5000 milliseconds (in 5ms increments) may be
placed between each scan transmission. Scan the Intermessage Delay barcode
below, then scan the number of 5ms delays, and the Save barcode from the
Programming Chart, beginning on page 222.
To remove this delay, scan the Intermessage Delay barcode, then set the number of
delays to 0. Scan the Save barcode from the Programming Chart, beginning on
page 222.
Interfunction Delays
Prefix Scanned Data Suffix
1 2345STX HT CR LF
Interfunction Delay
2nd Scan Transmission1st Scan Transmission
Intermessage Delay
Intermessage Delay