Honeywell Vuquest 3320g - Trigger Click; Good Read and Error Indicators

34 Vuquest 3320g User Guide
Trigger Click
To hear an audible click every time the scanner button is pushed, scan the Trigger
Click On barcode below. Scan the Trigger Click Off code if you don’t wish to hear the
click. (This feature has no effect on serial or automatic triggering.) Default = Trigger
Click Off.
Good Read and Error Indicators
Beeper – Good Read
The beeper may be programmed On or Off in response to a good read. Turning this
option Off only turns Off the beeper response to a good read indication. All error
and menu beeps are still audible. Default = Beeper - Good Read On.
Beeper Volume – Good Read
The beeper volume codes modify the volume of the beep the scanner emits on a
good read. Default = High.
[
*Trigger Click Off
Trigger Click On
Beeper - Good Read Off
* Beeper - Good Read On
Low
Medium