Honeywell Vuquest 3320g - Serial Output; USB

Vuquest 3320g User Guide 189
Single Scan Data Format Change Single Scan-Primary Data Format VSAF_0 85
Single Scan-Data Format 1 VSAF_1 85
Single Scan-Data Format 2 VSAF_2 85
Single Scan-Data Format 3 VSAF_3 86
External Input/Output
External Input *External Trigger Control Off EXTTRG0 87
External Trigger Control On EXTTRG1 87
*External Trigger Polarity High EXTTPO1 88
External Trigger Polarity Low EXTTPO0 88
External Output *External Illumination Control Off EXTILL0 89
External Illumination Control On EXTILL1 90
Symbologies
All Symbologies All Symbologies Off ALLENA0 94
All Symbologies On ALLENA1 94
Codabar Default All Codabar Settings CBRDFT 95
Off CBRENA0 95
*On CBRENA1 95
Codabar Start/Stop Char. *Don’t Transmit CBRSSX0 95
Transmit CBRSSX1 95
Codabar Check Char. *No Check Char. CBRCK20 96
Validate, But Don’t Transmit CBRCK21 96
Validate, and Transmit CBRCK22 96
Codabar Concatenation *Off CBRCCT0 96
On CBRCCT1 96
Require CBRCCT2 96
Codabar Message Length Minimum (2 - 60) *4 CBRMIN## 97
Maximum (2 - 60) *60 CBRMAX## 97
Code 39 Default All Code 39 Settings C39DFT 97
Off C39ENA0 97
*On C39ENA1 97
Code 39 Start/Stop Char. *Don’t Transmit C39SSX0 97
Transmit C39SSX1 97
Code 39 Check Char. *No Check Char. C39CK20 98
Validate, But Don’t Transmit C39CK21 98
Validate, and Transmit C39CK22 98
Selection
Setting
* Indicates default
Serial Command
# Indicates a
numeric entry
Page