Honeywell Vuquest 3320g - Data Matrix Message Length; Data Matrix Code Page

136 Vuquest 3320g User Guide
Data Matrix Message Length
Scan the barcodes below to change the message length. Refer to Message Length
Description on page 94 for additional information. Minimum and Maximum
lengths = 1-3116. Minimum Default = 1, Maximum Default = 3116.
Data Matrix Code Page
Data Matrix Code pages define the mapping of character codes to characters. If the
data received does not display with the proper characters, it may be because the
barcode being scanned was created using a code page that is different from the
one the host program is expecting. If this is the case, scan the barcode below,
select the code page with which the barcodes were created (see Symbology Charts
on page 211), and scan the value and the Save barcode from the Programming
Chart, beginning on page 222. The data characters should then appear properly.
Minimum Message Length
Maximum Message Length
Data Matrix Code Page