10 Vuquest 3320g User Guide
USB Serial
Scan the following code to program the scanner to emulate a regular RS232-based
COM Port. If you are using a Microsoft® Windows® PC, you will need to download a
driver from the Honeywell website (sps.honeywell.com). The driver will use the next
available COM Port number. Apple® Macintosh computers recognize the scanner
as a USB CDC class device and automatically use a class driver.
Note: No extra configuration (e.g., baud rate) is necessary.
CTS/RTS Emulation
ACK/NAK Mode
Remote MasterMind™ for USB
When using a USB interface, you may wish to configure your scanner to
communicate with Remote MasterMind Scanner Management Software (ReM).
Scan the ReM On barcode to communicate with ReM. To disable this capability,
scan ReM Off. Default = ReM On.
To Next Page
Loading...
