2 Vuquest 3320g User Guide
Connecting the Device
Connecting with USB
A scanner can be connected to the USB port of a computer.
1. Connect the appropriate interface cable to the device first, then to the
computer.
2. The scanner beeps.
3. Verify the scanner operation by scanning a barcode from the Sample Symbols,
beginning on page 220.
The unit defaults to a USB PC Keyboard. Refer to page 9 for other USB terminal
settings.
For additional USB programming and technical information, refer to “USB
Application Note,” available at sps.honeywell.com.
To Next Page
Loading...
