170 Vuquest 3320g User Guide
Show Scan Driver Revision
Scan the barcode below to output the scan driver revision. The scan driver controls
image capture.
Note: This command is not supported with the Gen 7 software revision. For infomation
about software revisions, see About Software Revisions on page 6.
Show Software Revision
Scan the barcode below to output the current software revision, unit serial number,
and other product information for the scanner.
Show Data Format
Scan the barcode below to show current data format settings.
Test Menu
When you scan the Test Menu On code, then scan a programming code in this
manual, the scanner displays the content of a programming code. The
programming function will still occur, but in addition, the content of that
programming code is output to the terminal.
Note: This feature should not be used during normal scanner operation.
Show Scan Driver Revision
Data Format Settings
DFMBK3?.
To Next Page
Loading...
