Vuquest 3320g User Guide 23
Control Character Output
This selection sends a text string instead of a control character. For example, when
the control character for a carriage return is expected, the output would display
[CR] instead of the ASCII code of 0D. Refer to ASCII Conversion Chart (Code Page
1252) on page 214. Only codes 00 through 1F are converted (the first column of
the chart).
Note: Control + X (Control + ASCII) Mode overrides this mode.
Default = Off.
Keyboard Modifiers
This modifies special keyboard features, such as CTRL+ ASCII codes and Turbo
Mode.
Control + X (Control + ASCII) Mode On
The scanner sends key combinations for ASCII control characters for values 00-1F.
Windows is the preferred mode. All keyboard country codes are supported. DOS
mode is a legacy mode, and it does not support all keyboard country codes. New
users should use the Windows mode. Refer to ASCII Conversion Chart (Code Page
1252) on page 214 for CTRL+ X Values.
Windows Mode Prefix/Suffix Off: The scanner sends key combinations for ASCII
control characters for values 00-1F, but it does not translate any prefix or suffix
information.
Default = Control + X Mode Off.
Control Character Output On
* Control Character Output Off
Windows Mode Control + X
Mode On
To Next Page
Loading...
