124 Vuquest 3320g User Guide
EAN/JAN-8 Addenda Separator
When this feature is On, there is a space between the data from the barcode and
the data from the addenda. When turned Off, there is no space. Default = On.
MSI
<Default All MSI Settings>
MSI On/Off
MSI Check Character
Different types of check characters are used with MSI barcodes. You can program
the scanner to read MSI barcodes with Type 10 check characters. Default = Validate
Type 10, but Don’t Transmit.
When Check Character is set to Validate Type 10/11 and Transmit, the scanner will
only read MSI barcodes printed with the specified type check character(s), and will
transmit the character(s) at the end of the scanned data.
To Next Page
Loading...
