Honeywell Vuquest 3320g - MSI Check Character

Vuquest 3320g User Guide 127
GS1 DataBar Expanded On/Off
GS1 DataBar Expanded Message Length
Scan the barcodes below to change the message length. Refer to Message Length
Description on page 94 for additional information. Minimum and Maximum
lengths = 4-74. Minimum Default = 4, Maximum Default = 74.
Trioptic Code
Note: If you are going to scan Code 32 Pharmaceutical codes (see page 99), Trioptic Code
must be Off.
Trioptic Code is used for labeling magnetic storage media.
* On
Off
Minimum Message Length
Maximum Message Length
On
* Off