Honeywell Vuquest 3320g - Inspecting Cords and Connectors; Replacing Cables

208 Vuquest 3320g User Guide
• Super Sani-Cloth
®
wipes
• Isopropyl Alcohol wipes (70%)
•CaviWipes
™
•Virex
®
256
•409
®
Glass and Surface Cleaner
•Windex
®
Blue
•Clorox
®
Bleach – 10%
• Gentle dish soap and water
Inspecting Cords and Connectors
Inspect the interface cable and connector for wear or other signs of damage. A
badly worn cable or damaged connector may interfere with scanner operation.
Contact your distributor for information about cable replacement. Cable
replacement instructions are on page 208.
Replacing Cables
The standard interface cable is attached to the scanner with an 15-pin modular
connector. The interface cable is designed to be field replaceable.
• Order replacement cables from Honeywell or from an authorized distributor.
• When ordering a replacement cable, specify the cable part number of the
original interface cable.