Vuquest 3320g User Guide 135
QR Code Page
QR Code pages define the mapping of character codes to characters. If the data
received does not display with the proper characters, it may be because the
barcode being scanned was created using a code page that is different from the
one the host program is expecting. If this is the case, scan the barcode below,
select the code page with which the barcodes were created (see Symbology Charts
on page 211), and scan the value and the Save barcode from the Programming
Chart, beginning on page 222. The data characters should then appear properly.
Data Matrix
< Default All Data Matrix Settings >
Data Matrix On/Off
To Next Page
Loading...
