138 Vuquest 3320g User Guide
Aztec Code
< Default All Aztec Code Settings >
Aztec Code On/Off
Aztec Code Message Length
Scan the barcodes below to change the message length. Refer to Message Length
Description on page 94 for additional information. Minimum and Maximum
lengths = 1-3832. Minimum Default = 1, Maximum Default = 3832.
Aztec Append
This function allows the scanner to append the data from several Aztec barcodes
together before transmitting them to the host computer. When the scanner
encounters an Aztec barcode with the append trigger character(s), it buffers the
number of Aztec barcodes determined by information encoded in those barcodes.
Once the proper number of codes is reached, the data is output in the order
specified in the barcodes. Default = On.
To Next Page
Loading...
