Honeywell Vuquest 3320g - Page 210

194 Vuquest 3320g User Guide
MSI Default All MSI Settings MSIDFT 124
*Off MSIENA0 124
On MSIENA1 124
MSI Check Character *Validate Type 10, but Don’t Transmit MSICHK0 125
Validate Type 10 and Transmit MSICHK1 125
Validate 2 Type 10 Chars, but Don’t Transmit MSICHK2 125
Validate 2 Type 10 Chars and Transmit MSICHK3 125
Validate Type 11 then Type 10 Char, but Don’t
Transmit
MSICHK4 125
Validate Type 11 then Type 10 Char and
Transmit
MSICHK5 125
Disable MSI Check Characters MSICHK6 125
MSI Message Length Minimum (4 - 48) *4 MSIMIN## 125
Maximum (4 - 48) *48 MSIMAX## 125
GS1 DataBar Omnidirectional Default All GS1 DataBar Omnidirectional
Settings
RSSDFT 126
Off RSSENA0 126
*On RSSENA1 126
GS1 DataBar Limited Default All GS1 DataBar Limited Settings RSLDFT 126
Off RSLENA0 126
*On RSLENA1 126
GS1 DataBar Expanded Default All GS1 DataBar Expanded Settings RSEDFT 126
Off RSEENA0 127
*On RSEENA1 127
GS1 DataBar Expanded Msg.
Length
Minimum (4 - 74) *4 RSEMIN## 127
Maximum (4 - 74) *74 RSEMAX## 127
Trioptic Code *Off TRIENA0 127
On TRIENA1 127
Codablock A Default All Codablock A Settings CBADFT 128
*Off CBAENA0 128
On CBAENA1 128
Codablock A Msg. Length Minimum (1 - 600) *1 CBAMIN#### 128
Maximum (1 - 600) *600 CBAMAX#### 128
Codablock F Default All Codablock F Settings CBFDFT 129
*Off CBFENA0 129
On CBFENA1 129
Codablock F Msg. Length Minimum (1 - 2048) *1 CBFMIN#### 129
Maximum (1 - 2048) *2048 CBFMAX#### 129
Selection
Setting
* Indicates default
Serial Command
# Indicates a
numeric entry
Page