EasyManuals Logo

HORNER XLE-Model 2 User Manual

HORNER XLE-Model 2
158 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #115 background imageLoading...
Page #115 background image
MAN0878-09-EN_XLE_XLT_UserManual
A u g u s t 2 3 , 2 0 1 8 P a g e 115 | 158
15.4 Establishing Communications Overview
The XLE/XLT can communicate with Cscape using USB to serial adapters, Ethernet, USB, CAN
(CsCAN) or modems. For communications other than RS-232 serial please refer to the manual
that ships with the adapter hardware being used for programming.
To communicate with the XLE or XLT via USB you will need the Automated Driver Installer
located on the Horner APG web site. The drivers may be loaded from the HE-XEC Ethernet
Utility / HTTP Web Server Demo / Communications Drivers section of the support
files page on our website, found here: https://hornerautomation.com/support-
files .
Next, connect a PC’s (Personal Computer running a Windows Microsoft operating system) USB
port via USB cable to the USB mini B port on the XLE/XLT OCS.

Table of Contents

Other manuals for HORNER XLE-Model 2

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the HORNER XLE-Model 2 and is the answer not in the manual?

HORNER XLE-Model 2 Specifications

General IconGeneral
BrandHORNER
ModelXLE-Model 2
CategoryController
LanguageEnglish

Related product manuals