MAN0878-09-EN_XLE_XLT_UserManual
A u g u s t 2 3 , 2 0 1 8 P a g e 16 | 158
CHAPTER 3: MECHANICAL INSTALLATION
NOTE: The datasheet is the first document to refer to for model-specific information related
to XLE/XLT models such as pin-outs, jumper settings, and other key installation information.
Visit our website, North America https://hornerautomation.com or Europe http://www.horner-
apg.com, to obtain datasheets, user documentation, and updates.
3.1 Overview
The mechanical installation greatly affects the operation, safety, and appearance of the system.
Information is provided to mechanically install the unit such as cut-out sizes, mounting
procedures, and other recommendations for the proper mechanical installation of the unit.
3.2 Mounting Requirements
XLE/XLT products can be mounted through a panel or on DIN rail.
3.2.1 Mounting Procedures (Installed in a Panel Door)
Figure 3.1 – Panel Mounting of the XLE/XLT and Close-up View of Back
To Next Page
Loading...
Need help?
General
