MAN0878-09-EN_XLE_XLT_UserManual
A u g u s t 2 3 , 2 0 1 8 P a g e 47 | 158
8.6 Ethernet Module Protocol Configuration
The Protocol Support area contains a list of all the protocols supported by the platform being
configured. To activate a protocol, check its checkbox.
For protocols that require additional configuration, click on a listed protocol to select it and
then click the Configure Selected Protocol button. This will open a new dialog with configuration
options for the selected protocol.
For detailed information on individual protocol configuration refer to the latest version of the
ETN 300 Manual SUP0740 [Ethernet Supplement Manual].
To Next Page
Loading...
Need help?
General
