HORNER XLE-Model 2 User Manual

MAN0878-09-EN_XLE_XLT_UserManual
A u g u s t 2 3 , 2 0 1 8 P a g e 51 | 158
9.3 System Menu – Details
The following sections describe each of the Sub-Menus in detail.
Set Network ID
The Network ID Sub-Menu only appears for XLE/XLT models that have CAN ports (XE1xx). This
Sub-Menu displays two System Settings of which only Network ID is editable.
Network Ok? Yes = NET1 connected to a CAN network and functioning
properly
No = Not ready to communicate on CAN network
Network ID: 1 to 253 = This node’s CsCAN Network ID; must be unique on
network
Set Network Baud
The Network Baud Sub-Menu only appears for XLE/XLT models that have CAN ports (XE1xx).
This Sub-Menu displays just one System Setting and it is editable.
Network Baud? 125kB = 125kBd CAN network
250kB = 250kBd CAN network
500kB = 500kBd CAN network
1 MB = 1MBd CAN network
Set Contrast
The Set Contrast Sub-Menu displays just one System Setting and it is editable.
Contrast:  = Current display contrast setting

HORNER XLE-Model 2 Specifications

General

Brand	HORNER
Model	XLE-Model 2
Category	Controller
Language	English