HP 5920 Series - Page 291

280
Task Command Remarks
Establish a connection
to an Stelnet server.
• In non-FIPS mode, establish a connection to an IPv4
Stelnet server:
ssh2 server [ port-number ] [ vpn-instance
vpn-instance-name ] [ identity-key { dsa | ecdsa |
rsa } | prefer-compress zlib | prefer-ctos-cipher
{ 3des | aes128 | aes256 | des } |
prefer-ctos-hmac { md5 | md5-96 | sha1 |
sha1-96 } | prefer-kex { dh-group-exchange |
dh-group1 | dh-group14 } | prefer-stoc-cipher
{ 3des | aes128 | aes256 | des } |
prefer-stoc-hmac { md5 | md5-96 | sha1 |
sha1-96 } ] * [ dscp dscp-value | publickey
keyname | source { interface interface-type
interface-number | ip ip-address } ] *
• In FIPS mode, establish a connection to an IPv4
Stelnet server:
ssh2 server [ port-number ] [ vpn-instance
vpn-instance-name ] [ identity-key { ecdsa | rsa } |
prefer-compress zlib | prefer-ctos-cipher { aes128
| aes256 } | prefer-ctos-hmac { sha1 | sha1-96 } |
prefer-kex dh-group14 | prefer-stoc-cipher
{ aes128 | aes256 } | prefer-stoc-hmac { sha1 |
sha1-96 } ] * [ publickey keyname | source
{ interface interface-type interface-number | ip
ip-address } ] *
• In non-FIPS mode, establish a connection to an IPv6
Stelnet server:
ssh2 ipv6 server [ port-number ] [ vpn-instance
vpn-instance-name ] [ -i interface-type
interface-number ] [ identity-key { dsa | ecdsa |
rsa } | prefer-compress zlib | prefer- ctos-cipher
{ 3des | aes128 | aes256 | des } |
prefer-ctos-hmac { md5 | md5-96 | sha1 |
sha1-96 } | prefer-kex { dh-group-exchange |
dh-group1 | dh-group14 } | prefer-stoc-cipher
{ 3des | aes128 | aes256 | des } |
prefer-stoc-hmac { md5 | md5-96 | sha1 |
sha1-96 } ] *[ dscp dscp-value | publickey
keyname | source { interface interface-type
interface-number | ip ip-address } ] *
• In FIPS mode, establish a connection to an IPv6
Stelnet server:
ssh2 ipv6 server [ port-number ] [ vpn-instance
vpn-instance-name ] [ -i interface-type
interface-number ] [ identity-key { ecdsa | rsa } |
prefer-compress zlib | prefer-ctos-cipher { aes128
| aes256 } | prefer-ctos-hmac { sha1 | sha1-96 } |
prefer-kex dh-group14 | prefer-stoc-cipher
{ aes128 | aes256 } | prefer-stoc-hmac { sha1 |
sha1-96 } ] * [ publickey keyname | source
{ interface interface-type interface-number | ipv6
ipv6-address } ] *
Available in user view.
The ecdsa keyword is
available in Release
2311P04 and later
versions.