DRAFT - HP Confidential - DRAFT
Removal and replacement procedures 29
o AC power input module
o DC power input module
7. If a rear drive cage option is installed, remove all rear drives. ("Hot-plug drive" on page 35, "Remove
a drive from the rear drive cage" on page 26)
8. Remove all the drives installed in the front drive cages 1 and 2 ("Extend the front drive cages" on page
21).
9. Remove the server from the rack:
a. Loosen the thumbscrews on the chassis ears till the screws are protruding out.
To Next Page
Loading...
Need help?
General