DRAFT - HP Confidential - DRAFT
Removal and replacement procedures 44
5. Disconnect all cables connected to the drive cage backplane.
6. Remove the drive backplane.
To replace the component, reverse the removal procedure.
Removing drive backplane from LFF front drive cage 2
WARNING: To reduce the risk of personal injury from hot surfaces, allow the drives and the
internal system components to cool before touching them.
CAUTION: To prevent damage to electrical components, take the appropriate anti-static
precautions before beginning any installation, removal, or replacement procedure. Improper
grounding can cause electrostatic discharge.
To remove the component:
1. Power down the server (on page 17).
To Next Page
Loading...
