DRAFT - HP Confidential - DRAFT
Removal and replacement procedures 61
4. Remove the fan cage cover.
To replace the component, reverse the removal procedure.
DIMM
WARNING: To reduce the risk of personal injury from hot surfaces, allow the drives and the
internal system components to cool before touching them.
CAUTION: To prevent damage to electrical components, take the appropriate anti-static
precautions before beginning any installation, removal, or replacement procedure. Improper
grounding can cause electrostatic discharge.
To remove the component:
1. Power down the server (on page 17).
2. Remove the server from the rack (on page 27).
3. Remove the access panel ("Access panel" on page 36).
4. Remove the air baffle ("Air baffle" on page 37).
5. Open the DIMM slot latches.
To Next Page
Loading...
Need help?
General