To Next Page

To Previous Page

DRAFT - HP Confidential - DRAFT

Removal and replacement procedures 59

Fan blank

WARNING: To reduce the risk of personal injury from hot surfaces, allow the drives and the

internal system components to cool before touching them.

CAUTION: To prevent damage to electrical components, take the appropriate anti-static

precautions before beginning any installation, removal, or replacement procedure. Improper

grounding can cause electrostatic discharge.

CAUTION: To prevent improper cooling and thermal damage, do not operate the server unless

all bays are populated with either a component or a blank.

To remove the component:

1. Power down the server (on page 17).

2. Remove the server from the rack (on page 27).

3. Remove the access panel ("Access panel" on page 36).

4. Remove the fan blank.

To replace the component, reverse the removal procedure.

Fan Module