Table 1-4 Operating environment (continued)
If the machine has been dropped, or if the cabinet appears damaged, unplug the machine from all interface
connections and request assistance from qualied service personnel.
If the machine does not operate properly after these instructions have been followed, unplug the machine from all
interface connections and request assistance from qualied service personnel.
If the plug does not easily enter the electrical outlet, do not attempt to force it in.
Call an electrician to change the electrical outlet.
Table 1-5 Operating method
Caution
Do not forcefully pull the paper out during printing.
Equipment damage could occur.
When removing jammed paper, do not use tweezers or sharp metal objects.
Equipment damage could occur.
Do not allow too many papers to stack up in the paper output tray.
This may cause paper jams.
Do not block or push objects into the ventilation opening.
Equipment damage could occur.
To switch o the power supply, remove the power cord from the electrical outlet.
Table 1-6 Installation/Moving
Warning
Place the machine in the environment where it meets the operating temperature and humidity specication.
Caution
Before moving the machine, turn the power o and disconnect all cords. If you have a medical condition that
prevents you from lifting, do not lift the machine. Ask for help, and always use the appropriate amount of people to
lift the device safely.
ENWW Safety information 5
To Next Page
Loading...