Network setup
NOTE: Some menus may not appear in the display depending on options or models. If so, it is not applicable to
your machine.
To change the menu options:
●
Press Menu > Network on the control panel.
Option Description
TCP/IP (IPv4) Selects the appropriate protocol and congure parameters to use the network
environment.
NOTE: There are lots of parameters to be set. If you are not sure, leave as is, or consult
the network administrator.
TCP/IP (IPv6) Selects this option to use the network environment through IPv6.
Ethernet Congure the network transmission speed or port.
NOTE: Turn the power o and on after you change this option.
Protocol Management HTTP You can set whether to use Web Service or not.
NOTE: Turn the power o and on after you change this option to O.
HTTPS Turn on secure communication over the network.
WINS You can congure the WINS server. WINS (Windows Internet Name Service) is used in the
Windows operating system.
SNMP V1/V2 You can set SNMP (Simple Network Management Protocol). Administrator’s can use SNMP
to monitor and manage machines on the network.
UPnP(SSDP) You can set UPNP protocol.
NOTE: Turn the power o and on after you change this option to O.
MDNS You can set mDNS (Multicast Domain Name System) settings.
Network Conguration This list shows information on your machine’s network connection and conguration.
Clear Settings Reverts the network settings to the default values.
NOTE: Turn the power o and on after you change this option.
68 Chapter 8 System and Other Settings ENWW