Available accessories
You can purchase accessories to enhance your machine's performance and capacity. These accessories must be
installed by a qualied HP authorized service provider, dealer, or the retailer where you bought the machine.
NOTE: Some features and optional goods may not be available depending on model or country/region.
Accessory Function
Optional tray
If you are experiencing frequent paper supply problems, you can attach an additional 250
b
sheet tray.
ADF
a
Automatic Document Feeder.
a
M436n Only
b
Plain paper 80 g/m
2
(20 lbs bond).
Available maintenance parts
To purchase maintenance parts, contact the source where you bought the machine. Replacing maintenance parts
can be performed only by an authorized service provider, dealer, or the retailer where you bought the machine.
The warranty does not cover the replacement of any maintenance parts once it has reached its “Average yield”.
Maintenance parts are replaced at specic intervals to avoid print quality and paper feed problems resulting from
worn parts, see table below. The purpose of which is to maintain your machine in top working condition. The
maintenance parts below should be replaced when the life span of each item has been met.
Parts
Average yield
a
Transfer roller Approx. 100,000 pages
Fuser unit Approx. 100,000 pages
MP Tray 1 pick up roller Approx. 100,000 pages
Tray 2 pick up roller Approx. 100,000 pages
Tray 3 pick up roller Approx. 100,000 pages
MP Tray 1 Friction Pad Approx. 50,000 pages
Tray 2 friction pad Approx. 50,000 pages
Tray 3 friction pad Approx. 50,000 pages
Document feeder (ADF) Roller Approx. 100,000 pages
Document feeder (ADF) Rubber Approx. 50,000 pages
a
It will be aected by the operating system used, computing performance, application software, connecting method, media, media size,
and job complexity.
ENWW Available accessories 73
To Next Page
Loading...
Need help?
General
