NOTE:
●
The IP address for WSD printer is http://IP address/ws/ (example: http:// 111.111.111.111/ws/).
●
If no WSD printer is displayed in the list, click The printer that I want isn't listed > Add a printer using a
TCP/IP address or hostname and select Web Services Device from Device type. Then enter the
printer's IP address.
4. Follow the instructions in the installation window.
Scanning using the WSD feature
1. Make sure that the machine is connected to your computer and powered on.
2. Place a single document face down on the document glass, or load the documents face up into the
document feeder.
3.
Select Scan > Scan To WSD on the control panel.
NOTE: If you see Not Available message, check the port connection. Or check the printer driver for WSD is
correctly installed.
4. Select your computer name from Destination List.
5. Select the option you want and press OK.
6. Scanning begins.
ENWW Scanning from a computer 61
To Next Page
Loading...