HP LaserJet MFP M436dn User Manual

ID card copying
Your machine can print 2-sided originals on one sheet.
The machine prints one side of the original on the upper half of the paper and the other side on the lower half
without reducing the size of the original. This feature is helpful for copying a small-sized item such as business
card.
NOTE:
●
The original must be placed on the scanner glass to use this feature.
●
If the machine set to Eco mode, this feature is not available.
Depending on the model, the operating procedure may dier.
1. Press ID Copy on the control panel.
Or select (Menu) > Copy Feature > Layout > ID Copy on the control panel.
2. Place the front side of an original facing down on the scanner glass where arrows indicate as shown. Then,
close the scanner lid.
NOTE: To get a better image, close the scanner lid and lightly press the scanner lid.
3. Place Front Side Press [Start] appears on the display.
4.
Press Start .
Your machine begins scanning the front side and shows Place Rear Side Press [Start].
52 Chapter 6 Copying ENWW

HP LaserJet MFP M436dn Specifications

General

Print Technology	Laser
Print Resolution	Up to 1200 x 1200 dpi
Scan Type	Flatbed, ADF
Monthly Duty Cycle	Up to 50, 000 pages
Functions	Print, Copy, Scan
Processor Speed	600 MHz
Memory	128 MB
Display	2-line LCD
Wireless Capability	No
Duplex Printing	Yes
Copy Resolution	Up to 600 x 600 dpi
Print Speed	Up to 23 ppm
Copy Speed	Up to 23 cpm
Standard Connectivity	Hi-Speed USB 2.0
Paper Handling Input	250-sheet input tray, 100-sheet multipurpose tray
Mobile Printing Capability	HP ePrint, Apple AirPrint
Scan Resolution, Optical	600 dpi
Media Sizes Supported	A4, A5
Media Types	Plain, Label, Cardstock, Envelope