Machine setup
NOTE: Some menus may not appear in the display depending on options or models. If so, it is not applicable to
your machine.
To change the menu options:
●
Press Menu > System Setup > Machine Setup on the control panel.
Item Description
Date & Time Sets the date and time.
Clock Mode Selects the format for displaying time between 12 hr. and 24 hr.
Language Sets the language of the text that appears on the control panel display.
Power Save Sets how long the machine waits before going to power save mode.
When the machine does not receive data for an extended period of time, power consumption is
automatically lowered.
Wakeup Event When this option is "On", you can wake up the machine from the power saving mode with the following
actions:
●
loading paper in a tray
●
opening or closing the front cover
●
pulling a tray out or pushing a tray in
Auto Power O Turns power o automatically when the machine has been in power save mode for the length of time set in
Auto Power O > On > Timeout.
NOTE:
●
To turn the machine on again, Press the (Power / Wake Up) button on the control panel.
●
If you run the printer driver or HP Scan Application, the time automatically extends.
●
While the machine is connected to the network or working on a print job, Auto Power O feature
doesn't work.
System Timeout Sets the time that the machine remembers previously used copy settings. After the timeout, the machine
restores the default copy settings.
Job Timeout Sets the length of time the printer waits before printing the last page of a print job that does not end with a
command to print the page.
Altitude Adjustment Optimize print quality according to the machine’s altitude.
Humidity Optimizes print quality according to the humidity in the environment.
Auto Continue Determine whether or not the machine continues printing when it detects the paper does not match the
paper settings.
●
0 Sec: This option allows you to continue printing when the paper size you have set is mismatched
with the paper in the tray.
●
30 Sec: If a paper mismatch occurs, an error message will display. The machine waits for about 30
second, then automatically clears the message and continue printing.
●
O: If a paper mismatch occurs, the machine waits until you insert the correct paper.
64 Chapter 8 System and Other Settings ENWW
To Next Page
Loading...
Need help?
General
