HP LaserJet MFP M436dn

Software installation instructions
The full software install is available for the following operating systems:
●
Windows XP 32–bit and 64–bit
●
Windows Vista 32–bit and 64–bit
●
Windows 7 32–bit and 64–bit
●
Windows 8 32–bit and 64–bit
●
Windows 8.1 32–bit and 64–bit
●
Windows 10 32–bit and 64–bit
Server operating system platforms support the installation of the HP LaserJet MFP M436n, M436dn, M436nda
print driver only using the Add Printer Wizard.
Other supported HP LaserJet MFP M436n, M436dn, M436nda print drivers available for download on hp.com:
●
HP UPD PCL6
●
HP M436 PCL6 V4 driver (for Windows 8.1 and Windows 10)
Install the software
1. Insert the software installer CD into the CD/DVD drive of the PC.
NOTE: If no CD/DVD drive is available, download the HP LaserJet MFP M436n, M436dn, M436nda full
software solution from www.hp.com/support/ljM436MFP.
2. The software installer should run automatically after inserting the CD. If the software installer does not
start automatically, browse the software installer CD and double-click on the le named “setup.exe”.
3. Follow the on screen instructions to install and congure the HP LaserJet MFP M436n, M436dn, M436nda
product software.
ENWW Software installation instructions 41