Reduced or enlarged copy
You can reduce or enlarge the size of a copied image from 25% to 400% from the document feeder or scanner
glass.
NOTE:
●
This feature may not be available depending on model or optional goods.
●
If the machine set to Eco mode, reduce and enlarge features are not available.
To select from the predened copy sizes
1.
Select Copy > Menu > Copy Feature > Reduce/Enlarge on the control panel.
Or select Menu > Copy Feature > Reduce/Enlarge on the control panel.
2. Select the option you want and press OK.
3.
Press the Stop button to return to ready mode.
To scale the copy by directly entering the scale rate
1.
Select Copy > Menu > > Copy Feature > Reduce/Enlarge > Custom on the control panel.
Or select Menu > Copy Feature > Reduce/Enlarge > Custom on the control panel.
2. Enter the copy size you want using the numeric keypad.
3. Press OK to save the selection.
4.
Press the Stop button to return to ready mode.
NOTE: When you make a reduced copy, black lines may appear at the bottom of your copy.
ENWW Changing the settings for each copy 51
To Next Page
Loading...