Copy features on the control panel
Copy feature
The following topics describe how to use the Copy and Copy Setup features on the control panel. These features
control the appearance of the generated copies.
NOTE: Some menus may not appear in the display depending on options or models. If so, it is not applicable to
your machine.
To change the menu options:
●
Press Copy > Menu > Copy Feature on the control panel.
Or Menu > Copy Feature on the control panel.
Table 6-1 Copy feature
Item Description
Reduce/Enlarge Reduces or enlarges the size of a copied image.
NOTE: If the machine is set to Eco mode, reduce and enlarge features are not available.
46 Chapter 6 Copying ENWW
To Next Page
Loading...