HP LaserJet MFP M436dn

Loading paper in the tray
Introduction
The following topics describe how to prepare and load paper in Tray 2, optional Tray 3, and Multi-purpose Tray 1.
●
Preparing paper
●
Tray 2 / optional tray
●
Multi-purpose Tray 1
Preparing paper
●
Use only print media that meets the specications required by the machine.
●
If you use print media that does not meet the specications outlined in this user guide, the following
problems may occur:
–
Low printing quality, paper jams, excessive wear on the machine
●
The weight, material, surface condition, and moisture content of the print media may aect the
performance and printing quality of the machine.
●
Some print media may not produce the desired result even if it meets the specications outlined in this
user guide.
This may occur due to mishandling of the print media, unsuitable temperature or humidity, or other
uncontrollable factors.
●
Using print media that does not meet the specications outlined in this user guide may result in machine
malfunctions that require repairs.
Such repairs are not covered by the warranty agreement.
●
Do not use inkjet photo print media with this machine. Doing so may damage the machine.
●
Do not use creased, torn, or damp print media.
WARNING! The use of inammable media or foreign materials left in the printer may lead to overheating of the
unit and, in rare cases may cause a re.
ENWW Loading paper in the tray 25