HP LaserJet MFP M436dn User Manual

Operating system problems
Condition Suggested solutions
“File in Use” message
appears during
installation.
Exit all software applications. Remove all software from the startup group, then restart Windows. Reinstall
the printer driver.
“General Protection Fault”,
“Exception OE”, “Spool
32”, or “Illegal Operation”
messages appear.
Close all other applications, reboot Windows and try printing again.
“Fail To Print”, “A printer
timeout error occurred”
message appear.
These messages may appear during printing. Just keep waiting until the machine nishes printing. If the
message appears in ready mode or after printing has completed, check the connection and/or whether an
error has occurred.
Machine information is
not displayed when you
click the device in the
Devices and Printers.
Check the Printer properties. Click the Ports tab.
(Control Panel > Devices and Printers > Right-click on your printer icon and select Printer properties)
If the port is set to File or LPT, uncheck them and select TCP/IP, USB, or WSD.
NOTE: Refer to the Microsoft Windows User’s Guide that came with your computer for further information on
Windows error messages.
ENWW Operating system problems 141

HP LaserJet MFP M436dn Specifications

General

Print Technology	Laser
Print Resolution	Up to 1200 x 1200 dpi
Scan Type	Flatbed, ADF
Monthly Duty Cycle	Up to 50, 000 pages
Functions	Print, Copy, Scan
Processor Speed	600 MHz
Memory	128 MB
Display	2-line LCD
Wireless Capability	No
Duplex Printing	Yes
Copy Resolution	Up to 600 x 600 dpi
Print Speed	Up to 23 ppm
Copy Speed	Up to 23 cpm
Standard Connectivity	Hi-Speed USB 2.0
Paper Handling Input	250-sheet input tray, 100-sheet multipurpose tray
Mobile Printing Capability	HP ePrint, Apple AirPrint
Scan Resolution, Optical	600 dpi
Media Sizes Supported	A4, A5
Media Types	Plain, Label, Cardstock, Envelope